Talk to sales +44 7482 555176 Mon–Fri, 9am–6pm GMT +61 2 3820 5369 Mon–Fri, 9am–6pm AEST +1 551 379-0344 Mon–Fri, 9am–6pm EDT

Late payment has been a problem for UK small businesses for years. Government research puts the cost to the economy at almost £11 billion a year and estimates that it closes 38 businesses every day (Department for Business and Trade). In May 2026 the government introduced the Commercial Payments Bill to deal with it.

The bill will cap payment terms at 60 days when larger businesses pay smaller suppliers, and 30 days for public bodies. It will also make late payment interest compulsory and let the Small Business Commissioner fine persistent late payers up to 1% of their UK turnover. The bill passed the House of Lords in October 2026 and is now in the House of Commons. The government says the main rules won't start before 2027.

For finance teams paying suppliers, most of the preparation is in the approval process, because a bill has to be approved before it can be paid within the term.

This guide explains where the bill stands, what each measure means for your finance team, and how to get your approval process ready before the rules start.

Key facts

  • 60 days is the proposed maximum payment term when a larger business pays a smaller supplier. Public bodies will have 30 days. Longer terms in a contract become void and are replaced with 30 days (Napthens).
  • 8% above the Bank of England base rate becomes compulsory late payment interest. Contracts can no longer replace it with a lower rate (Small Business Commissioner).
  • Up to 1% of UK turnover is the proposed fine for persistent poor payment practice (Napthens).
  • 38 UK businesses close every day because of late payment, about 14,000 a year. Late payment costs the economy almost £11 billion a year (Department for Business and Trade, 2025).
  • £26 billion is owed to UK businesses in late payments at any one time, an average of £17,000 per affected business (same source).
  • UK small businesses waited an average of 29.1 days to be paid in Q2 2026, and were paid 8.3 days after the agreed terms (Xero Small Business Insights).
  • UK businesses using ApprovalMax with Xero approve a typical bill in just over a day (1.05 days) after it's sent for approval, and 85% within a week. Only 1.7% of their bills have payment terms over 60 days (ApprovalMax data, October 2025 to September 2026).
  • 1 in 8 purchase orders was billed above its approved value, typically by 19% (ApprovalMax data).

Where the Commercial Payments Bill is now

The bill has finished its passage through the House of Lords and had its first reading in the House of Commons. It is not law yet. MPs still need to debate and vote on it, and it then needs Royal Assent. Most measures will start on dates the government sets later in regulations.

Date Stage
October 2026Passed the House of Lords; first reading in the House of Commons
15 September 2026Lords report stage
21 July 2026Lords committee stage
9 June 2026Lords second reading
19 May 2026Introduced in the House of Lords

The government has said the 60-day cap will start no earlier than 2027. A tighter 45-day cap was considered and dropped for now, though it may come back after further consultation (Adfin).

Some rules already apply. Large companies already report their payment performance in their directors' reports for financial years starting on or after 1 January 2026.

What the Commercial Payments Bill changes

Measure What the bill proposes What it means for your finance team
Maximum payment terms60 days when a larger business pays a smaller supplier. 30 days for public bodies. Longer terms become void and default to 30 days.Any supplier contract over 60 days needs renegotiating. Your approval process needs to fit inside the term.
Late payment interestInterest at 8% above the Bank of England base rate becomes compulsory. Contracts can't swap in a lower rate.Every late bill costs money automatically, on top of fixed compensation of £40 to £100 per invoice that already exists.
Invoice disputesA buyer who raises a dispute late, or without enough detail, pays the supplier a fixed sum: £40 or 1% of the amount, whichever is higher.Queries about a bill need raising quickly. A bill left unopened until it's due can't be disputed cheaply.
Small Business CommissionerNew powers to investigate, settle disputes and fine persistent late payers up to 1% of annual UK turnover. Small businesses get a legal right to adjudication.Persistent late payment could lead to an investigation and a fine.
Construction retentionsA ban on retentions (money held back from a contractor until the work is finished). Timing is still to be consulted on.Construction businesses need to plan for paying the full amount on time instead of holding some back.
Board reportingThe boards of large companies will need to explain poor payment performance.Payment times become a board-level number.

The exemptions are narrow. The cap is not expected to apply to contracts between two large businesses, or where the buyer is smaller than the supplier (Napthens). The bill may still change as it passes through the Commons.

Why late payment is usually an approval problem

Late payment is often the result of a slow approval process. A bill can't be paid until the right person has approved it, and every day it waits uses up part of the payment term.

The Department for Business and Trade's research found that 22% of businesses spend staff time chasing late payments, an average of 86 hours a year each. Across the UK economy that adds up to 133 million hours (DBT, 2025). Faster approvals mean fewer of those chasing calls and emails reach your team.

38
UK businesses close every day because of late payment
That's about 14,000 a year. Source: Department for Business and Trade, 2025.

ApprovalMax data on UK businesses using Xero shows that approval itself is usually quick. For most bills that end up late, the delay happens before the bill reaches the approver. The figures below cover almost 5 million bills approved between 1 October 2025 and 30 September 2026:

  • A typical bill is approved just over a day (1.05 days) after it's sent for approval. 48% of bills are approved within a day and 85% within a week.
  • A typical bill is sent for approval 4 days after its invoice date. Those days count against the payment term before any approver sees the bill.
  • About 1 in 4 bills (24%) is still not approved on its due date. Most of these were already overdue when they were sent for approval (18.5% of all bills). Only about 6% of bills became overdue while waiting for approval. Bills approved late were typically approved 7 days after the due date.

So for most businesses, the biggest gain is getting bills into the approval process sooner, as well as approving them quickly.

Disputes are the other cause of delay. In ApprovalMax data, 1 in 8 purchase orders was billed above its approved value, typically by 19% (ApprovalMax, October 2026). Each of those bills is likely to need a query with the supplier. Under the bill, a query raised late or without enough detail costs the buyer at least £40, so mismatches need spotting when the bill arrives.

Under the 60-day cap, the time a bill spends waiting for approval comes out of the time you have to pay it.

What to do before the 60-day cap starts

The main rules start in 2027 at the earliest, which leaves time to work through these steps.

  1. List every supplier contract with terms over 60 days. Plan to renegotiate them before the cap starts, because longer terms will default to 30 days. In ApprovalMax data, only 1.7% of UK bills had terms over 60 days and the typical term was 30 days, so for most businesses this list will be short.
  2. Measure how long bills wait for approval. Take a month of bills and count the days from the invoice date to approval, and from approval to payment. If approval takes more than a few days, that's where to start. For comparison, UK businesses using ApprovalMax with Xero send a typical bill for approval 4 days after its invoice date and approve it just over a day later.
  3. Set an approval deadline inside your payment terms. For example, every bill approved within 10 working days of arrival. Automatic reminders, and a named backup approver for holidays, stop bills stalling. Our guide to designing an accounts payable approval process covers how to set this up.
  4. Raise purchase orders before the work is ordered. A bill that matches an approved order can be approved quickly. A bill with no order behind it starts a conversation.
  5. Raise queries the day a bill arrives. Under the bill, a late or vague dispute costs at least £40. Check bills against the purchase order as soon as they come in, not when they're due.
  6. Report payment times to the board now. Large companies already report them. Smaller businesses that track them early will spot problems before a supplier or the Commissioner does.

How ApprovalMax helps you pay suppliers on time

ApprovalMax works with Xero, QuickBooks Online and NetSuite. It moves bills to the right approvers, keeps them moving and records every decision.

  • Approval deadlines. Set a deadline on each bill. Approvers get a reminder 24 hours before it and when it passes. UK organisations using approval deadlines had fewer bills approved after the due date: 21.6%, compared with 25.4% for organisations using neither deadlines nor nudges. This shows the two go together, not that deadlines caused the difference.
  • Nudges. Anyone on the request can send a reminder to an approver who hasn't acted yet.
  • Substitutes. When an approver is on holiday, their bills go to a named substitute instead of waiting for them to come back.
  • Approve on mobile. Budget holders approve from the ApprovalMax app, without a Xero or QuickBooks login.
  • Bill-to-PO matching. Each bill is checked against its purchase order. Routine bills that match can be approved automatically, and mismatches are flagged on arrival, while there is still time to query them.
  • Audit trail. Every approval is recorded with who approved it and when, so you can show how long each step took.

Many teams run bills, purchase orders and expenses through one approval matrix, so the same rules and deadlines apply to every type of spend.

The faster your bills are approved, the easier it will be to pay every supplier within 60 days.

Free trial
Get bills approved in time to pay suppliers on time
No credit card required. Works with Xero, QuickBooks Online and NetSuite.
Start free trialBook a demo

Frequently asked questions

What is the Commercial Payments Bill?

The Commercial Payments Bill is a UK law going through Parliament to tackle late payment. It caps payment terms at 60 days for larger businesses paying smaller suppliers and 30 days for public bodies. It also makes late payment interest compulsory and gives the Small Business Commissioner powers to fine persistent late payers.

When does the Commercial Payments Bill become law?

The bill passed the House of Lords in October 2026 and is now in the House of Commons. It becomes law after MPs approve it and it receives Royal Assent. The government has said the 60-day payment cap will start no earlier than 2027.

What is the maximum payment term under the new rules?

The maximum will be 60 days when a larger business pays a smaller supplier, and 30 days for public bodies. Longer terms in a contract will be void and replaced with a 30-day term.

How much late payment interest can a supplier charge?

Suppliers can charge statutory interest at 8% above the Bank of England base rate, plus fixed compensation of £40 to £100 per invoice depending on its size. Under the Commercial Payments Bill, this interest becomes compulsory, and contracts can no longer set a lower rate.

What happens if a business keeps paying suppliers late?

Under the bill, the Small Business Commissioner can investigate persistent late payers, direct them to change their practices and fine them up to 1% of their annual UK turnover.

Does the Commercial Payments Bill affect construction?

Yes. As well as the 60-day cap, the bill bans retentions in construction contracts. Retentions are money a client holds back from a contractor until the work is finished. The start date for the ban is still to be consulted on.

About the sources

Department for Business and Trade, Late payments infographic (2025), based on London Economics research for DBT and the Office of the Small Business Commissioner (July 2025). Small Business Commissioner, Late Payments Bill: what it could mean for your business (October 2026). UK Parliament, Commercial Payments Bill stages. Adfin, The UK late payment reforms: what has been decided and what has not (22 October 2026). Napthens, Commercial Payments Bill: a guide (August 2026). Xero, How UK SMBs are getting paid faster: XSBI payment trends (30 October 2026). ApprovalMax, Budget vs actual: what 5.3 million bills show about committed spend (October 2026), based on anonymised, aggregated data from organisations using ApprovalMax with Xero.

ApprovalMax bill approval times analysis (November 2026): anonymised, aggregated data from UK organisations using ApprovalMax with Xero (Xero base currency GBP, demo organisations excluded), covering bills approved by approvers in ApprovalMax between 1 October 2025 and 30 September 2026. Bills with a due date earlier than the invoice date (2.3%, data entry errors) are left out of the due-date figures. The smallest group behind any figure is 95 organisations.

This article explains a bill that is still going through Parliament. It is not legal advice, and the details may change before it becomes law.